Receiver Firmware 4.7 (Lisa voice)
Released: Mar. 2, 2021 Download this firmware and save it to your local hard drive. (Depending on your browser, you may have to right click and select "Save as...")
Use the Flight Data Analyzer software to update your receiver. Simply click 'Tools' on the Flight Data Analyzer menu bar and then select 'Update Firmware'.
|
New features included in version 4.7
1. Added support for the AUX pyro channel output. The AUX pyro channel can now be configured to fire using a set of user specified criteria. This also requires an Mx150 Transmitter with a firmware revision of 5.8 or later. The AUX pyro channel can also be fired manually at any time by the user sending an uplink command from the receiver.
2. Added support for the SSR (solid state relay). The SSR can now be configured to operate using a set of user specified criteria. This also requires an Mx150 Transmitter with a firmware revision of 5.8 or later. The SSR can also be operated manually at any time by the user sending an uplink command from the receiver.
3. SEP pyro channel firing time is now adjustable from 0.5 sec to 5.0 sec. Firmware version 5.8 or later is required in the Mx150 Transmitter to allow the SEP firing time to be adjusted.
4. Added real time display of the pyro board External Inputs. The new screen can be seen on the receiver by following the path: MAIN MENU > DATA > NEXT MENU > EXT INPUTS.
5. Added the ability to instantly jump from the TELEMETRY screen to the MANUAL DEPLOY screen by pressing both the up and down arrow buttons at the same time. This only works when the TELEMETRY screen is being displayed. It allows a user to quickly jump to the screen for manually deploying the drogue or main parachute without having to enter all the button presses to follow the normal path of: MAIN MENU > COMMANDS > PYRO SYSTEM > DEPLOYMENT > MANUAL DEPLOYMENT.
2. Added support for the SSR (solid state relay). The SSR can now be configured to operate using a set of user specified criteria. This also requires an Mx150 Transmitter with a firmware revision of 5.8 or later. The SSR can also be operated manually at any time by the user sending an uplink command from the receiver.
3. SEP pyro channel firing time is now adjustable from 0.5 sec to 5.0 sec. Firmware version 5.8 or later is required in the Mx150 Transmitter to allow the SEP firing time to be adjusted.
4. Added real time display of the pyro board External Inputs. The new screen can be seen on the receiver by following the path: MAIN MENU > DATA > NEXT MENU > EXT INPUTS.
5. Added the ability to instantly jump from the TELEMETRY screen to the MANUAL DEPLOY screen by pressing both the up and down arrow buttons at the same time. This only works when the TELEMETRY screen is being displayed. It allows a user to quickly jump to the screen for manually deploying the drogue or main parachute without having to enter all the button presses to follow the normal path of: MAIN MENU > COMMANDS > PYRO SYSTEM > DEPLOYMENT > MANUAL DEPLOYMENT.