Multitronix
  • Home
  • Products
    • Kate-3 Transmitter
    • Kate-3 Pyro Board
    • Kate-1 Transmitter
    • Receiver
    • Turn-on Coil
    • Carrying Case
    • Nosecones
    • Specifications
  • Buy
  • Software
  • Firmware
  • Documents
    • Kate-3 Documents
    • Kate-2 Documents
    • Kate-1 Documents
  • Flights
    • 408K Flight
    • 293K Flight
    • 188K Flight
    • 142K Flight
    • 118K Flight
    • 96K Flight
    • 90K Flight
    • 40K Flight
    • 28K Flight
    • 16K Flight
  • About
  • Contact
Receiver Firmware 4.5
​Released:  Mar. 24, 2020

Download this firmware and save it to your local hard drive. Depending on your browser you may have to right click and select "save as..."
firmware-mx120-4.5.0.0-200324.162328.mxfw
File Size: 5227 kb
File Type: mxfw
Download File

Use the Flight Data Analyzer software​ to update your receiver.  Simply click 'Tools' on the Flight Data Analyzer menu bar and then select 'Update Firmware'.
Picture

​New features included in this release: 
1.  Added support for adjustable firing duration on the sustainer motor igniter for the Mx152 Pyro board.  Sustainer motor igniter firing duration is now adjustable from 0.5 sec to 5.0 sec. Firmware version 5.6 or later is required in the Mx150 Transmitter to allow the firing time to be adjusted.  Only the sustainer motor igniter pyro channel has an adjustable firing time.  All other pyro channels use a fixed time of 0.5 sec.  An adjustable sustainer motor igniter firing time provides flexibility for using different types of igniters. 

2.  Added support for a new Mx150 transmitter capability that outputs GPS NMEA sentences in real time.  This allows real time GPS information to be streamed from the transmitter to other electronics onboard the rocket.  For example, a GPS overlay board for displaying live GPS information on a real time video downlink signal. Firmware version 5.6 or later is required in the Mx150 Transmitter to support this new capability.  It also requires a modified version of the Mx152 pyro board that has its AUX pyro channel replaced with a UART serial port.

3.  No support yet for AUX or SSR (solid state relay) outputs on the Mx152 pyro board.

Picture
Previous version of receiver firmware  (v4.4)
TelemetryPro... "when failure is not an option"

TelemetryPro® is a registered trademark of Multitronix LLC

Multitronix LLC reserves the right to change or obsolete products without prior notice.

Website copyright © 2014-2023
Multitronix LLC       All Rights Reserved